Additional Color-Matching Systems

Fiberr can also develop colors using the following identification and measurement systems:

• Pantone Matching System (PMS) Standardized color-identification system widely used in design, printing, branding, and plastics.
• Natural Color System (NCS) Scandinavian color system based on the human perception of primary colors and commonly used in architecture and coatings.
• BS 4800 and BS 381C British color standards commonly used for construction, industrial, transportation, and safety applications.
• ANSI Safety Colors U.S. safety-color conventions associated with ANSI Z535 hazard, warning, and identification applications.
• ASTM Color Standards ASTM D1535 and related methods used for color specification, measurement, and tolerance control in plastics and coatings.
• Munsell Color System Scientific color-notation system describing hue, value, and chroma for precise material identification and testing.
• Federal Standard 595 U.S. government color standard still referenced for military, industrial, and government procurement.
• ISO 3668 and ISO 7724 International standards covering visual color comparison, color measurement, and permissible tolerances.

Standard Colors

Vermilion

RAL 2002

A strong red-orange color used for hazard identification, restricted zones, emergency equipment areas, machinery guards, and locations requiring high visual prominence.

Traffic Orange

RAL 2009

A highly visible orange commonly used for warning areas, construction zones, temporary access routes, machinery protection, and industrial safety identification.

Signal Yellow

RAL 1003

A saturated yellow suitable for safety markings, designated pathways, caution areas, equipment zones, and applications requiring strong visual contrast.

Traffic Yellow

RAL 1023

A common industrial safety color used for walkways, stair treads, platform edges, caution zones, access points, and areas where high visibility is important.

Signal Green

RAL 6032

Commonly used to identify safe routes, designated access areas, emergency or first-aid locations, landscaped settings, and facilities where a green architectural finish is preferred.

Traffic White

RAL 9016

A clean, bright finish commonly selected for architectural applications, food-processing areas, clean environments, ceiling systems, light-reflective spaces, and modern commercial facilities.

Signal Grey

RAL 7004

A light neutral grey suited to commercial walkways, manufacturing facilities, municipal projects, rooftops, architectural platforms, and applications requiring a clean industrial appearance.

Basalt Grey

RAL 7012

A medium industrial grey commonly used for platforms, access walkways, equipment areas, utilities, wastewater facilities, and installations where dirt concealment and a neutral appearance are priorities.

Graphite Grey

RAL 7024

A dark contemporary grey suitable for industrial flooring, equipment platforms, architectural walkways, transportation facilities, and projects requiring a low-maintenance modern finish.

Graphite Black

RAL 9011

A dark finish used for architectural screening, equipment guards, fencing, transportation projects, stage and event applications, and installations where visual concealment is desired.

Beige

RAL 1001

A warm neutral color suited to architectural, recreational, poolside, marina, dock, hospitality, and public-space applications where the grating should blend with stone, concrete, sand, or natural surroundings.

Custom Colors

In addition to the standard palette, Fiberr can produce custom molded grating colors upon request. Spectrophotometer-based color-matching tools are used in our laboratory to measure the target sample and develop a corresponding pigment formulation.

Custom color matching can support corporate branding, architectural coordination, safety identification, equipment standards, replacement projects, and applications requiring compatibility with an existing color specification.

This color-matching service is provided at no additional cost. Physical samples or approved color references may be required before production to establish the applicable visual and instrumental color tolerances.

Fiberr custom color-code format: RALXXXX-ColorMatch